Self-Help Knowledge
Base Articles

 

LinkSprinter: Cable and Flash Port Features

 
 
Views: 0
 

The LinkSprinter has the ability to locate distance to cable fault, length, and status of the four pairs. It can also be used to flash the light on a hub or switch port.

Cable
You can check distance to cable fault, length, and status of four pairs. This will not work if you are plugged into a switch. One end of the cable should be plugged into the LinkSprinter and the other end left open (not plugged into anything).

Flash
You can use this feature to flash the light on hub/switch port. This is helpful for identifying where a cable is plugged into.

You can access both of these features from the Tools menu using the mobile UI. To access the mobile UI, please see What is the LinkSprinter Mobile UI? 



Please Note: These features are not available on the classic LinkSprinter 100 and 200 models.