You can use your AirCheck G3 to locate APs and Wi-Fi clients from the Channels Map screen for BSSIDs and Clients.
To begin a location action:
1. Start the Wi-Fi app.
2. From the menu icon, select BSSIDs or Clients.
3. Select the BSSID or Client that you want to locate.
4. Tap the FAB menu icon in the lower right corner of the screen. This displays the FAB pop-up options.
5. Tap Locate. This opens the Locate screen and causes your AirCheck G3 to "listen" for the BSSID or Client wireless devices you want to find using either the internal antennas or the optional external antenna (sold separately or in kits).
The test unit can emit an audible tone that increases in rate and pitch as the signal strength of the device increases (as you get closer to it). Tap the speaker icon to turn sound on or off. Use the volume slider by the speaker icon to turn the sound up or down. (If you have an external sound device attached, volume is controlled by the buttons on the side of your unit.)
The External Antenna toggle enables the optional external antenna for BSSID or Client location. o In areas with many rooms, like a hospital or school, the internal antennas are more effective. See Using the Internal Antennas to Locate below. o In large, open areas, the external antenna can help locate devices more quickly. See Using the Optional External Antenna below.
