Update Software
To update, you must have a valid AllyCare support contract on your unit. To prevent problems caused by losing power during a software update, supply power to the OneTouch analyzer with the AC adapter.

Updating Software via Link-Live Cloud Service
Starting with OneTouch version 6.5.1, you can download updates from Link-Live if your OneTouch is claimed. 
 

1. On the HOME screen, tap TOOLS.
2. Scroll down to the Maintenance Tools section and tap Software Update.
3. On the Update Software screen, touch the CHECK UPDATE button. A pop-up dialog box informs you if an updated firmware version is available.
4. Touch YES to download the firmware.
5. Select a storage location for the update file by answering YES or NO when the options are shown. After you touch YES, the .img file will download to the selected location.
6. Navigate to the directory where you saved the new software image file, and select the file.
7. Select the OK button to install the new firmware.
8. Select OK again to confirm. The new file will be installed and the analyzer will restart. The process will take several minutes.

Updating Software Using a USB Drive or SD card

You can install the new software image file from a USB flash drive or an SD card.
 

1. On the HOME screen, tap TOOLS.
2. Scroll down to the Maintenance Tools section and tap Software Update.
3. Navigate to the directory where you saved the new software image (.img) file and select the file.
4. Select the OK button.
5. Select YES to install the new file.

The new file will be installed and the analyzer will restart. The process will take several minutes.