The Wi-Fi management port allows for an optional Wi-Fi adapter that can be connected to the OneTouch AT’s USB port on the right side of the device. There are 3 supported adapters that can be connected:

• Asus USB-N10 Nano
• Netgear WNA1000M
• TP-Link TL-WN725N v1.0, v2.0, and v2.1

Note: As we are unable to offer these adapters, they are available through numerous authorized resellers.

The Wi-Fi Management port is disabled by default and needs to be configured on the Management Port configuration screen prior to use. To configure the Wi-Fi management port:

1. Insert the Wi-Fi management port adapter into the OneTouch AT’s USB port.
2. From the HOME screen, tap TOOLS
3. ​Scroll down to the Maintenance Tools section and tap Management Port. The management port screen is displayed. 
4. On the Active Port button, tap Wi-Fi
5. Tap the Wi-Fi button
6. Tap the Address button, then tap DHCP or Static.
   1. Selecting Static will show additional selections:
      • DNS2
      • DNS1
      • Gateway
      • IP, Subnet Mask
7. Tap the SSID button.
8. ​Tap an SSID from the list of available SSIDs.
9. Tap the Security button. It will take you to the Security screen.
10. Tap the Type button if you want to change the current setting.
    1. If you change the security type, additional selections will become available. These additional selections will vary depending on the selected authentication type.
11. Tap each new selection that became available as a result of changing the authentication type and provide the requested information.
12. Tap the back button Port screen.
13. ​Tap the Connect button take effect to return to the initial Management for your new settings to take effect.